Register Now

Login

Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

Login

Register Now

How to configure the MAC address on my DIR series of Dlink router?

How to configure the MAC address on my DIR series of Dlink router?

Routers specified for their lightning fast speed and high security helps the user in accomplishing each and every major task that the user wants to perform within the network area. Dlink routers are intellectually configured with their easy to use web interface which provides the users a whole lot of advantage to easily configure these devices and utilize them in an appropriate manner. The devices are easy to interact with the www.dlinkrouter.local link. All you have to do is to type www.dlinkrouter.local or 192.168.1.1 on the address bar to get to the Netgear Router login window.

Here are some common issues of Dlink routers

How to configure the MAC address on my DIR series of Dlink router?

DIR series of Dlink routerSteps to configure MAC address on my DIR series of Dlink router

  • Turn on your desktop and open up a browser in your home window.
  • Type www.dlinkrouter.local or 192.168.0.1 on the address bar of the browser. The link will redirect the user to the Netgear Router login window.
  • Type “admin” as the default username on the username field and if you haven’t made any changes within the default password of the Dlink router login window.
  • Click on the login button and the user will land on the homepage of the dlinkrouter.local
  • Go to the Advanced tab residing on the top of the screen, then go to the Network Filter tab residing on the left side of the basic window.
  • Select the method of MAC filtering from the drop-down selection
  • Turn off MAC filtering, Turn on MAC filtering and allow the list computers to access network and Turn on your MAC filtering and deny the computers to access your network.
  • Now, select your device from the drop-down list of DHCP client or the user can also enter the MAC address manually on the MAC address field.
  • Click on the save settings tab to save down your settings.

How to perform Dlink router setup of Dlink AC2600 Wi-Fi router?

Steps to perform Dlink router setup
Steps to perform Dlink router setup

  • Unplug all the cables which are attached with your modem or any other networking device.
  • Connect the Ethernet Cable connecting one end to the router and another end to the Ethernet Port of the modem.
  • Now, connect Ethernet Cable from system to one of the LAN port of the router. The user can also use a wireless connection to connect the computer with the router. For using the wireless connection the user needs to type SSID Name and the Wi-Fi password of the device.
  • Connect the power adapter of the modem in your power source.
  • If the power LED of your device doesn’t lit, then press the power button residing on the back of the router.
  • After both the power LED as well as the Internet LED of the router are lit, then you need to proceed with the router configuration.

How to configure your Dlink router after the Setup process of the router?

Configuration of the Dlink routers after the setup process

  • Open up the browser in your Wi-Fi connected desktop.
  • Type www.dlinkrouter.local on the address bar of the browser and you also can type 192.168.1.1 as the URL of the browser to get to the Dlink router login window.
  • If you are performing the Dlink router setup for the first time then a welcome screen will come prompting you to click on the Next button to move forward to the next step for the initialization of the setup process.
  • The router will automatically start to detect the Internet Connection type and if cannot then select the Internet Connection yourself manually and then click on the Next tab to continue.
  • For PPPoE users, the username of PPPoE and password supplied by the ISP. Click on the Next tab to continue.
  • Now, manage your wireless settings by assigning Network Name and the Wi-Fi password on the Wireless settings tab. The password will allow the wireless device to connect to the wireless network.
  • Click on the Next tab to continue.
  • Continue to follow the instructions of Setup Wizard and finish the configuration of your router. After the Internet connection has properly established in your router and is connected to the Internet, the LED will turn green indicating the proper connection of the Internet with the router. The message will get displayed “Congratulations! You have completed the installation of the router.

How to enable Remote Management service in the Dlink router?

enable Remote Management service in the Dlink routerRemote Management service in the Dlink router allows the users to remotely manage and access the router from anywhere.. The only prominent and special thing about the service is that instead of typing the LAN IP address of the Internet, the user can also type the Internet IP address of the device. Steps to enable Remote Management service in Dlink router

  • Open up the browser and mention the IP address of your router on the address bar of the browser.
  • Dlink router login page is going to flash up on your screen.
  • Mention the credentials within their specified task fields. Type “admin” on the username field and mention your password in the password field. If you haven’t assigned any password yet then leave the password field blank.
  • Click on the login button and Menu dashboard of the Dlink router will appear on the screen.
  • Go to the tools tab and then go to the Administration tab.
  • Click on the checkbox to enable Remote Management service.
  • Type the desired port in the dialogue box of Remote Admin Port. The user can also leave the default port at the default value.
  • Now, finally, click on the Save settings tab to save the settings.
  • You easily can be able to locate your WAN IP by clicking on the STATUS tab of the window.

How to change the Wireless security Password on my D-link AC1900 MU-MIMO router?

The wireless security on Dlink AC1900 MU-MIMO router can easily be changed through its web interface which is redirected through www.dlinkrouter.local. Any changes in the routers are managed and performed by the web management service which is a convenient method to have a grasp in our devices.

Steps to change the Wireless security Password on my Dlink AC1900 MU-MIMO router
Dlink AC1900 MU-MIMO router

  • Open up the browser in your Wi-Fi connected desktop.
  • Type www.dlinkrouter.local on the web address bar of the browser. Type 192.168.1.1 as the URL of the browser to interact with the default gateway of the router.
  • Dlink router login window appears on the screen.
  • Type “admin” on the default username as the username field and mention “password” as the default password of the password field. Click on the login button.
  • Go to the Setup tab residing at the right hand of the screen, then click on the Wireless settings tab on the left side of the screen.
  • Click on the Manually Wireless Network Map.
  • Now, scroll down to change the password of the Wireless Security Mode.
  • After performing all the above steps to change the password, click on the Save settings tab at the top of the page.

How do I configure an inbound filter on my Dlink router?

Inbound Filter on my Dlink router can be configured by following steps

  • Type www.dlinkrouter.local or 192.168.1.1 on the address bar of the browser.
  • Click on the Features tab residing on the top of the bar and then go to the firewall tab.
  • Click on the IPV4 rules, then select turn IPV4 filter ON. Then click on the Add rule tab.
  • Create your own rule.
  • Click on the save tab to add your rule.

How to fix the problem when the Internet on my router is dropping the connections?

Follow these instructions on the to fix the above issue

  • Make sure that the place where you have kept your device is properly ventilated, In any case, if the router is not fetching the adequate amount of signals then your router could suffer these issues. Not getting enough amount of Wi-Fi signals is the most basic issue users suffers with when their router is not properly placed.
  • Make sure that the router you are using is properly updated. Firmware Update in the device is the most essential method which is to be performed regularly in order to maintain the functionality of the router. Dlink also sends a notification in a registered mail to aware the user of the notification bar.
  • If the user is using the Ethernet Connection then check the Wire has properly attached to their Specific ports or not. If the user is utilizing wireless connection then he has to check that his system should be within the Wi-Fi range.
  • Clear the browsing history of your Internet Explorer in which you are searching down your operation.
  • Perform a factory reset on your Dlink router and follow these links for instructions to restore the factory default settings into the router.

How to restore configurations on my Dlink AC2600 Router?

restore configurations on my Dlink AC2600 RouterSteps to restore configurations on my Dlink AC2600 router

  • Visit Dlink router login window by typing www.dlinkrouter.local on the address bar of the browser.
  • Type “admin” on the address bar of the browser and mention your assigned password on the password tab of the login screen. Leave the password field blank as a default password of the login screen.
  • Click on the Management tab and then at last click on the System admin tab of the menu Dashboard window.
  • Click on the System tab.
  • To save your configuration settings, click on the save tab.
  • Now, to restore the configuration click on the Select File tab to select the file you want to back up. Click on the Restore button once you selected the file and the file will get restored.

How to check the firmware version on my Dlink router?

The firmware version on the Dlink router can be updated or also can be checked through the web interface of the router.

Steps to check the firmware of Dlink router through the web interface

  • Launch a browser in your Wi-Fi connected desktop.
  • Type www.dlinkrouter.local or 192.168.1.1 on the address bar to get to the Dlink Router login window.
  • Enter “admin” as a default username on the username field and leave the password field blank of the login window. Click on the login button and you will be redirected to the home window of the dlinkrouter.local
  • To check the firmware version click on the Firmware version tab.

What is Smart Connect in the Dlink router?

Smart connect feature within the Dlink router is responsible for choosing the best wireless frequency band which will deliver the excellent amount of bandwidth to the router. The feature automatically selects the best frequency band for transmitting enough amount of Wi-Fi signals into the router. The router with the help of this feature somehow grabs the best amount of Wi-Fi signals and optimally distributes it to all the devices to the network.

How to enable Guest Access on my Dlink router?

Guest access on Dlink router can be enabled through these steps

  • Type www.dlinkrouter.local on the address bar of the browser or type 192.168.1.1 as the URL of the browser.
  • Mention credentials in their respective fields. Type “admin” on the username tab and leave the password field blank if you haven’t set the password yet.
  • Click on the login button.
  • Menu dashboard will appear on the screen.
  • Click on the settings tab and go to the Wireless tab.
  • Then, click on the Guest Zone tab.
  • Configure your Guest Zone yourself and click on the save button to save the link.

Which models of the Dlink router supports bridge Mode?

These models of Dlink routers support Bridge Mode

  • DIR-895L
  • DIR-885L
  • DIR-880L
  • DIR-868L
  • DIR-865L
  • DIR-605L

How to enable DMZ on Dlink AC2600 MU-MIMO Router?

  • Login to your www.dlinkrouter.local on the web address bar of the browser.
  • Type “admin” on the address bar of the browser and leave the password field blank.
  • Click on the login button and you will be redirected to the menu dashboard on the screen.
  • Click on the features tab and then go to the Firewall tab.
  • Slide the bar to Enable DMZ to enable DMZ service within the menu Dashboard.
  • Fill the IP address on the DMZ IP address and then click on the Save button.

About Mike

Leave a reply