Register Now

Login

Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

Login

Register Now

How to setup Amped Wireless RTA1750 Router?

How to setup Amped Wireless RTA1750 Router?

setup.ampedwireless.com : How to setup Amped Wireless RTA1750 Router?

Prior to Amped Wireless RTA1750 Router setup:

  • Disconnect and switch off your existing router if you are using it and are about to replace with your Amped Wireless RTA1750 Router.
  • Also disconnect your Amped Wireless RTA1750 Router from computer and the modem on home network.
  • Power off and Disconnect the modem from the power source, also, remove the back battery if it is being used by the modem.

Amped Wireless RTA1750 Router setup via setupa.ampedwireless.com login:

  • Connect your Amped Wireless RTA1750 Router to the modem using the blue colored ethernet cable that connects to the modem at one end and the blue modem port on the Amped Wireless RTA1750 Router at the other end.
  • Connect your above modem back to the power by plugging its power adapter to the power source and reinserting the back battery if used by the modem.
  • Now, Attach the antennas to the required antenna ports on the Amped Wireless RTA1750 Router.
  • Connect your computer to the Amped Wireless RTA1750 Router using an included grey Ethernet cable that connects to an available port on your computer and one of the LAN ports on the router.

You can also connect your computer to the Router’s Wi-Fi Network using the default wireless settings mentioned on the router’s label.

  • Connect the Router to the power by attaching the power adapter to its PWR port and a power outlet.
  • Turn on your router, modem and connected computer.
  • Open your Web Browser on the computer to Access the amped wireless Setup Wizard for Amped Wireless RTA1750 Router
  • Enter amped wireless router login http://setup.ampedwireless.com or default login IP address http://192.168.3.1 into the web address bar.
  • On setting up the Amped Wireless RTA1750 Router for the first time, the amped wireless router’s Setup Wizard will automatically load.
  • For manually configuring your Amped Wireless RTA1750 Router, choose to skip the amped wireless Setup Wizard.
  • The amped setup Wizard will automatically try to detect your Internet settings and configure the Amped Wireless RTA1750 Router.
  • On successful detection of the Internet connection, you will see a green check mark.
  • Click Next to proceed ahead.
  • You can then Personalize your Amped Wireless RTA1750 Router’s Wi-Fi Settings and change the default values by assigning new wireless network name and password for both of your 5GHz Wi-Fi network and 2.4GHz Wi-Fi network.
  • Create an admin Password for your Router for securing the amped wireless router login access via setup.ampedwireless.com.
  • The Amped Wireless RTA1750 Router will reboot on its own taking up to 1 minute to start again.
  • Once the Amped Wireless RTA1750 Router has rebooted, it will load the Setup Summary page providing you with the details of your Amped Wireless RTA1750 Router setup via setupa.mpedwireless.com login.

About Mike

Leave a reply